Over/Underdrive Transfer Case:TF2 and Gelande II

About this part

Specifications

• 1.47 / 1 Gearing .8 Mod Gears Hardened Steel Gears Cast Casing Wide Gears Has same mounting as our popular Hammer Transfer Case Output Shaft OD: 0.19in / 5.0mm Total Weight: 6.21oz / 176g

You will receive

• 1x RC4WD Over/Under Drive Transfer Case 1x 16T Gear 1x 17T Gear 1x 19T Gear 1x 20T Gear 1x M3 x 6mm Steel Button Head Cap Screws (Black) 1x M3 x 10mm Steel Button Head Cap Screws (Black) There are 6 gearing options available: 15T/22T (Stock) : 1 : 1.47 Gear Ratio - Front axle goes same speed as rear To change the gear ratio remove the cover on the side with the two shafts.
• The following are the gear combinations of Rear Output to Front Output: 17T / 19T combo = 1:1.27 front axle will rotate 27% faster than rear 16T / 20T combo = 1:1.33 front axle will rotate 33% faster than rear 19T / 17T combo = 1:1.42 front axle will rotate 42% faster than rear 20T / 17T combo = 1:1.57 front axle will rotate 57% faster than rear 20T / 16T combo = 1:1.67 front axle will rotate 67% faster than rear

Fits