Rear Hubs and Bearing Spacers (+/-2mm Adj Roll Center L/R Eb)

About this part

Improve the handling of your Tekno RC EB/NB48 2.X vehicles with these new +/-2mm rear hubs! Our drivers discovered that the -2mm position (closest hole to the bearing) increased rear end grip, stability, and predictability on all track conditions during testing. Although these hubs include an optional high roll center setting (hinge pin further away from the bearing), it was rarely used during our testing. Compatibility These new hubs are only compatible with Tekno RCs 2.X buggies and should not be used with ET or NT truggies. TKR9284B rear arms are required.

Fits