Axle Carriers/Oversized Bearings Blue:Revo/Slayer

About this part

• This is a set of optional RPM Axle Carriers/Steering Blocks
• For the TRA Revo.
• These will also work on the T/E Maxx 2.5R and 3.3 versions.

Features

• Constructed of molded composite material, blue in color
• Wall thickness around the pillow-balls has been increased by 40%
• Eliminating split walls
• Over 20% more material supports the pillow-balls, preventing them
• From pulling through
• Redesigned reinforcing rib supporting tie rod mount
• Redesigned boot lock tabs for easier removal of the silicone boots
• Press-fit bearings in the carrier for reduced axle movement
• Two-piece pillow-ball set screws use aluminum and Delrin for the
• Ultimate in holding power under extreme situations

You will receive

• Two Axle Carriers/Steering Blocks
• Two 12x21x5mm Inner Bearings
• Two 6x15x5mm Outer Bearings
• Four Aluminum Set Screws
• Four Delrin Bushing Caps
• Instruction Sheet

Requirements

• Installing on axles, no modifications required

Comments

• Replacement Bearing Set, RPMC8570
• Replacement Pillow-Ball Set Screws, RPMC0800
• Do not use the TRA #5356 Long Travel Rocker Arm Set with these
• Axle Carriers. Doing so will void the RPM warranty.

Fits